Log in

View Full Version : How to splitcam with Verysoft Webcamsplitter 2016



Pages : 1 [2] 3 4 5

hyori
02-26-2016, 10:06 AM
^^ I think I know the answer, but like to here more experienced opinions. When split camming CB with say...Bonga or MFC what do you do when you get a private on Bonga or MFC when CB doesn't have a break button? At least I've yet to find one. I suppose I could just do the private because my CB guys are consistent tippers and I don't really mind doing a toy show in public chat for them. hmmm, your thoughts girls??

I put a password on my CB if I get a private on MFC or shut it down if I get a private on SM so there are less chances of SM disconnecting. MFC has a break button, but, don't use it too much. If the private is going longer than 10 minutes, log out of MFC. With Bonga you just force private with the private chat button. Other sites that have a force private button are Cams.com, (it's called Nude chat), AW and Xlovecam if I remember correctly.

JessRyan
02-29-2016, 09:34 PM
^^ thanks for the tips girl. Your video does explain that towards the end. I've been watching and listening in the mornings when I'm getting ready to cam. I'm an old dog and it takes a long time to learn new tricks.
Okay, today I tried splitting with SM and Bonga. The guys couldn't hear me, but I read through the thread here and found the answer. Okay, then with SM, it was lagging to much. i have an envy core i7 m7 notebook, but I don't know much more about what it is. I do know I paid over a $1000 for it this time last year. Is it a quad core? I don't know. I feel (and will readily admit) to being real ignorant when it comes to those things. Anyway, SM lagged big time and to tell the truth without sounding like I'm bragging, I'm busy enough on SM that I don't feel the need to split it with another site. I wanted to try though, but wasn't happy with how distracted I was with the lagging.
So I logged off Bonga and just cammed on SM my for my usual SM shift on Mondays.
So after I made my goal on SM, I had a few extra hours to try splitting on bonga and mfc. It worked! I got some privates on bonga and put mfc to "away" and was able to focus on both sites evenly.
No complaints. Tomorrow I'll try CB and MFC with the lovense lush. yikes! CB is my #1 site, but the guys are awesome and understanding. I'm not worried, just excited. cha ching next week? it's 3 sites with CB, MFC and Bonga

KatM
02-29-2016, 10:06 PM
Hyori, i wish to ask u something pls: i tried to split sm + bonga with manycam but the HD option on bonga was gray, not available, support there was of not much help, i asked about verysoft, they had no clue lol.

Can i get the hd option to work on bonga if i use verysoft? I also installed that nano plugin they offer there to be able to stream in HD tho i dont wanna buy the software if it's not going to work on bonga.
They said the models who stream in HD there dont use any splitter lol but stream directly with their camera software. true or not? I tried myself, i was able to stream in HD with my c920 camera directly but not with manycam. So how about verysoft? TY!

(logged off work & too tired now to watch the video in case u explain in there, i hope is not too much trouble to enlighten me here?) Ty!

hyori
03-01-2016, 06:34 AM
Hyori, i wish to ask u something pls: i tried to split sm + bonga with manycam but the HD option on bonga was gray, not available, support there was of not much help, i asked about verysoft, they had no clue lol.

Can i get the hd option to work on bonga if i use verysoft? I also installed that nano plugin they offer there to be able to stream in HD tho i dont wanna buy the software if it's not going to work on bonga.
They said the models who stream in HD there dont use any splitter lol but stream directly with their camera software. true or not? I tried myself, i was able to stream in HD with my c920 camera directly but not with manycam. So how about verysoft? TY!

(logged off work & too tired now to watch the video in case u explain in there, i hope is not too much trouble to enlighten me here?) Ty!

No, most likely you won't be able to get the HD settings on Bongs due to the limitations of yur computer. You can somewhat choose HD resolutions that force HD but, it will probably compromise SM. I don't think HD settings are important on Bongs anyway. I always recommend giving your main site the best settings and all the others the lower ones.

KatM
03-01-2016, 07:40 AM
Thank YOU Hyori, u helped me from wasting money here just now when i need them for the rams actually, yes my investment will go towards the rams to get my pc to work with SM properly, looks like there is no room for splitcamming if i want the best out of SM. Ty! u are of great help here!

JessRyan
03-01-2016, 08:00 AM
Hyori where did you get your 3.2 encoder? I still have the 3.1 and I noticed in your video you have 3.2. I don't really have any issues with my old encoder (I did update to the 720 settings and when I turn off geoblock I'm still towards the top row front page) but I can't find the 3.2 encoder on streamate and the adobe site wants me to sign up for it or something. Is it really something I need? curiosity got to me when I saw your video.

hyori
03-01-2016, 08:36 AM
Hyori where did you get your 3.2 encoder? I still have the 3.1 and I noticed in your video you have 3.2. I don't really have any issues with my old encoder (I did update to the 720 settings and when I turn off geoblock I'm still towards the top row front page) but I can't find the 3.2 encoder on streamate and the adobe site wants me to sign up for it or something. Is it really something I need? curiosity got to me when I saw your video.

You can feel safe downloading 3.2 from the Adobe site, they just want you to make an account so they can send you promo stuff. Just remember to uncheck any extra software they might try to push on yu during the install.

I find 3.2 works better with win10 and geforce video cards. Older systems work better with 3.1 in general but there are exceptions eg. you have bult in graphics that might work better with 3.2. It is probably best if you try both out and see which one works better for your set up.

JessRyan
03-01-2016, 05:05 PM
YAY! I'll take my diploma now~ Day 2 of split camming and I split 3 sites successfully!! Bonga Chaturbate and MFC AND with the lovense toy. ;-)

hyori
03-01-2016, 06:48 PM
So fun right? You are so awesome! I never doubted you.

JessRyan
03-02-2016, 05:52 PM
Damn, I tried to split SM and Bonga today and I don't think it's gonna work. I have to compromise my settings too much for bonga and the guys notice and mention it. oh well, I do okay on SM camming it alone. Damn encoder does take all the energy from my lap top. You can just "feel it"

KatM
03-06-2016, 08:15 PM
Ok, back in ur thread Hyori with my new setup, i need ur help again pls, u soo tech savvy and resourceful plus very kind xx
Dont wanna pester my friends with PM's here so i put this in public for whomever is willing to help, ty!

So, i downloaded the free version of verysoft for testing purpose & gave it a try to splitcam SM running 720p settings with bonga running 800x450 or so, that hd resolution they have.

So here is a print screen of my cpu/memory usage while running on my PC these 2 sites.
Pc specs are: i5 desktop HP, win 7 64bit, 8GB memory, 1GB graphic's card
What do u guys think, will my PC handle this setup on the long run?
CPU usage floats between 55 and 70%.

44384

I'll edit and add more details shortly regarding my concerns. ->cont

hyori
03-06-2016, 08:25 PM
It should be OK for now until you can upgrade to Windows 10. Try it out and see, no point in worrying about how it will be, just run with the bulls.

KatM
03-06-2016, 08:36 PM
So, my first question is, the pro version of verysoft will use less system resources or the same like the free version?

Now, i am taking into consideration the price difference between verysoft which is $39.95 and manycam splitter which is $24.85.

I had the old free manycam version that had the HD resolutions available & the option to take the logo off, i used that splitter before but i lost it over new windows installation even i saved it in drive D (will have to figure out where my D drive stuff vanished to & why :(, this later on).

My second question is, what should i buy considering the price difference and the resource consumption?
You guys know how much of PC resources the paid version of manycam uses compared to the paid version of verysoft?
I dont want the manycam logo on my screen, this i know for sure so i wont use the free version not even for testing as i read it has less options anyway so i cant figure out how the paid version will work with my system before i buy it.

So, verysoft at $40 or manycam at $25?

Thank you in advance for input and help!! xxx

hyori
03-06-2016, 08:45 PM
You don't need the pro version unless you are thinking about setting up more than one computer on your network. Get the regular version, it only costs $19.99. http://very-soft.com/product/webcamsplitter

There will be a significant difference in system resource usage between Manycam and Verysoft. Manycam is pretty shitty software, full of bloat and doesn't utilize 64 bit because it is 32 bit.

The version in my video is the regular one as well.

KatM
03-06-2016, 09:05 PM
OMG Hyori, u are a Goddess no kidding, thank u soo much for all of these!
I had the impression the Pro version is the one i need but now u show me i can buy it at half price, this is fantastic!
Waiting for money in my Payoneer account on friday so i can make the purchase (i always pull my money off ATM here & pay in cash everywhere for security reasons and cause of cultural in my country, people pay in cash most things here, u just cant go to the bazar and pay by card for fresh fruits or veggies villagers sell, we still have these here :) ).
My next purchase will be WIN 10 genuine ;) then i reinstall and format everything myself, from scratch.

Thank u again, now i know what to do, I love u baby, i really do xxx

Bella28
03-07-2016, 07:52 AM
THANK YOU!!!!! I asked this last week and got no response lol <3

Bella28
03-07-2016, 07:55 AM
yeah manycam sucks I noticed when I used manycam it lowered my placement when I used it through the encoder last year and as soon as I stopped using it my placement shot back up. ty for the very useful info I will be getting this soon! Also, I am getting a new pc soon will I be able to download it again on that one or should I wait?

hyori
03-07-2016, 12:12 PM
OMG Hyori, u are a Goddess no kidding, thank u soo much for all of these!
I had the impression the Pro version is the one i need but now u show me i can buy it at half price, this is fantastic!
Waiting for money in my Payoneer account on friday so i can make the purchase (i always pull my money off ATM here & pay in cash everywhere for security reasons and cause of cultural in my country, people pay in cash most things here, u just cant go to the bazar and pay by card for fresh fruits or veggies villagers sell, we still have these here :) ).
My next purchase will be WIN 10 genuine ;) then i reinstall and format everything myself, from scratch.

Thank u again, now i know what to do, I love u baby, i really do xxx

It sounds like you live in a very charming area, you'll always have fresh produce!

I'm happy to help you out, Kat. I hope all goes well.


yeah manycam sucks I noticed when I used manycam it lowered my placement when I used it through the encoder last year and as soon as I stopped using it my placement shot back up. ty for the very useful info I will be getting this soon! Also, I am getting a new pc soon will I be able to download it again on that one or should I wait?

Yes, the license can be used up to 2 computers. If you think you'll be using it on other computers though, maybe hold off and wait. If not, you can d/l it for your current and then use the second one on the new computer.

Cutie101
03-08-2016, 08:09 PM
Hey hyori, thanks a lot for this tutorial!
I use not verysoft and I am so happy with it! The CPU is all good and I can easily broadcast on 3 cam sites.
I used to use verysoft a few years ago, but i forgot about how good it actually is! Glad to have it back!
Just a small curiosity...I've watched your video and noticed your feed had 60 fps, what camera do you use?
You mentioned a DSLR? (my english is a bit bad so i am not sure if i heard well..)..
Thanks!

hyori
03-09-2016, 06:25 AM
Hey hyori, thanks a lot for this tutorial!
I use not verysoft and I am so happy with it! The CPU is all good and I can easily broadcast on 3 cam sites.
I used to use verysoft a few years ago, but i forgot about how good it actually is! Glad to have it back!
Just a small curiosity...I've watched your video and noticed your feed had 60 fps, what camera do you use?
You mentioned a DSLR? (my english is a bit bad so i am not sure if i heard well..)..
Thanks!

Hi Cutie, thanks for the positive feedback.

The video was made with a screencapture software called Apowersoft Screencapture. It's very good and can capture up to 60 frames per second or more so you can do slow motion as well.

Yes, I do use a DSLR camera as a webcam. I will be releasing a video series on how set up your own DSLR as a webcam in the near future. It will be very comprehensive eg. How to pick the right camera, equipment, lighting and the different set ups you can use. The video series will cost $29 and it will be geared to the established cam girl who is ready to take her game to the next level.

Sally Says
03-09-2016, 10:12 AM
I'm getting a new laptop, can I transfer my purchased verysoft or do I need to purchase again? Is it easy to move over?

hyori
03-09-2016, 06:34 PM
Verysoft allows you to use the license on 2 different computers so you shouldn't have an issue re-entering the same license again into your new computer.

Cutie101
03-09-2016, 11:37 PM
Hi Cutie, thanks for the positive feedback.

The video was made with a screencapture software called Apowersoft Screencapture. It's very good and can capture up to 60 frames per second or more so you can do slow motion as well.

Yes, I do use a DSLR camera as a webcam. I will be releasing a video series on how set up your own DSLR as a webcam in the near future. It will be very comprehensive eg. How to pick the right camera, equipment, lighting and the different set ups you can use. The video series will cost $29 and it will be geared to the established cam girl who is ready to take her game to the next level.

Oh...I will definately buy it!
I do have a DSLR camera and I'd love to use it!
I achieves dust anyway and I paid $800 for it..pff.

Selenasecret
03-10-2016, 12:27 AM
Nice hyori. Will get hubbie to take a look. And 64-bit version is always a winner.

KatM
03-11-2016, 05:44 PM
Babes, pls excuse my 'dull mind' moment here now as i just woke up from sleep ... i realize i dont have the product in my email inbox yet??
I looked up invoice dated 11th of march, they say they going to deliver my product not later than 13th or march, is this how things work?

I need THAT software i bought to use the registration key & license on it during installation i understand? ty xx

ETA:
Why i was thinking i can install the free version and just "update" it by putting in the license? Duhh!! Kat LOL

seicento
03-11-2016, 05:53 PM
you download the free software from the site and put in the license key they sent you thru email.pretty simple.they don`t send you a software.

KatM
03-11-2016, 06:48 PM
^^^ Thank You seicento, DUH!! Sleepy still lol. That's what they said in the email or that's how "i got it" lol........ Ty xx

EDIT: something is wrong here and i try to understand why is not working cause that's what i did for the 1st time in fact, tried to activate the thing as i had the software already installed into my PC then i got this kind of error and uninstalled thinking they maybe send me a 'unique' software specially coded for me only? Duh!!
Uninstalled, downloaded & re-installed the pro version from site and tried again, still getting the same error.

44417

Basically the numbers dont match it shows, the Activation Code i received & introduced BUT Current Installation ID i did not introduce manually, these puzzle me big style. No new email in Inbox or Bulk here, just what i insert here now.

44418

Then: http://very-soft.com/support
Reading on their page about how server generates keys and such is just too complicated for me to understand at this very moment, dont know what/where to look for, more options available, also the type of purchase i did, hyori provided me with the link to pay 19.95 using a 'share option' or so (i am soo not competent with these all PLUS non native in english OMG), i was billed $19.95 exactly.

Can somebody explain like for the stupid (LOL) in very basic english what the heck i need to do to make this thing work? FML!! Almost in tears here :(
THANK YOU!

seicento
03-11-2016, 08:37 PM
"Uninstalled, downloaded & re-installed the pro version from site and tried again, still getting the same error."

Kat,why would u download pro version if you bought a license for the regular one ?Maybe that is the issue?I might be wrong but check what you downloaded.

Edit :you are supposed to download this

http://very-soft.com/product/webcamsplitter

then go to tray icon -> help-> activate -> insert code and you should be done.

KatM
03-11-2016, 09:19 PM
"Uninstalled, downloaded & re-installed the pro version from site and tried again, still getting the same error."

Kat,why would u download pro version if you bought a license for the regular one ?Maybe that is the issue?I might be wrong but check what you downloaded.

YES, WHY!?! I know, right? OMG! Cause i mixed info up here ....... i know LOL.
So YOU SOO RIGHT, I DOWNLOADED THE WRONG FREAKING FILE DUH!!

Edit :you are supposed to download this

http://very-soft.com/product/webcamsplitter

then go to tray icon -> help-> activate -> insert code and you should be done.

SO IT WORKED, ALL ACTIVATED, ALL GOOD, THANK YOU SOO MUCH SEICENTO, YOU ROCK!! :-*



SO WE BEAT THE BITCH! HAHAAAAAAAA, Shoot me now !! Phewww!! All Good now, Thank You!!

seicento
03-11-2016, 09:22 PM
SO WE BEAT THE BITCH! HAHAAAAAAAA, Shoot me now !! Phewww!! All Good now, Thank You!!
LOL. You`re welcome.

sexysusie
03-12-2016, 08:28 AM
Just wondered if there's any way to get the sort of wenham effects on verysoft that you can on manycam https://manycam.com? I really want to try the chroma key and the mirror effects but manycam just kills my comp so I use verysoft for splitting.

hyori
03-12-2016, 11:45 AM
Just wondered if there's any way to get the sort of wenham effects on verysoft that you can on manycam https://manycam.com? I really want to try the chroma key and the mirror effects but manycam just kills my comp so I use verysoft for splitting.

No, Verysoft doesn't have chroma key so you would need to use Manycam. I like Xsplit for greenscreen because it does it the best but it is expensive and resource heavy but if you want to do special fx it is the best one out there for live streaming other than really high end programs.

smeca
03-13-2016, 05:27 AM
hi all... i downloaded the file but it say the signature is corrupt or wrong, and giving me a warning if i start to open it... did anyone else get this? Don't wanna mess up my comp, it's new.

goddesslouboutin
03-13-2016, 05:37 AM
Iv got same issue

hyori
03-13-2016, 06:12 AM
Did you guys download from this link: http://very-soft.com/product/webcamsplitter

It should work no problem. Just remember to purchase it to get rid of the nag screens.

sexysusie
03-13-2016, 06:17 AM
Thanks Hyori I saw an mfc model using a couple of different cam effects and it was going down a storm in her room. Wanted to try it but I guess i shall prioritise going a good feed, at least till the new laptop beast arrives and I can experiment :D

LaylaLovely
03-18-2016, 06:43 PM
Okay so I just got a new desktop and now the sm broadcaster won't pick up the splitter and neither will Imlive... Has anyone else had these problems with the verysoft splitter ?

bellestocking
03-18-2016, 10:42 PM
Okay so I just got a new desktop and now the sm broadcaster won't pick up the splitter and neither will Imlive... Has anyone else had these problems with the verysoft splitter ?



Streamate's broadcaster blocks splitting software. You will need to use Adobe FME or OBS as your encoder for streamate for splitting purposes.

Shanda1836
03-19-2016, 07:20 PM
I’ve tried and tried the last 2 night to make my VerySoft spitter work with CB and BC, and I can’t get it to work. It works on CB, but either I have no sound or no cam on BC, and they guys on CB complain that my stream is choppy. It’s been driving me nuts, and I set it up per Hyori’s video. So I’m at a loss of what to do.

And yes, I paid for it. I have super fast upload speed. I use my logitech C920 for mic on both sites, as per suggestions here and from VerSoft, any suggestions?

TheBrownFox
03-19-2016, 10:24 PM
I need to see if I can find my old post on here from a long time ago (I had a different SW name/account, I think, because I was having problems logging into the forum or some bs), but there was a time I spent money on VerySoft (for ImLive and AdultWork, I think) and couldn't get it to work. I was pretty pissed about it since I had spent money on it. I'm not sure if the issue had something to do with ImLive's HD encoder or what, but this was a long time ago. I remember being frustrated trying to figure it out, that I went back to either using the free version of ManyCam, or just deciding to broadcast on ONE site at a time. Lol.

hyori
03-19-2016, 10:38 PM
I’ve tried and tried the last 2 night to make my VerySoft spitter work with CB and BC, and I can’t get it to work. It works on CB, but either I have no sound or no cam on BC, and they guys on CB complain that my stream is choppy. It’s been driving me nuts, and I set it up per Hyori’s video. So I’m at a loss of what to do.

And yes, I paid for it. I have super fast upload speed. I use my logitech C920 for mic on both sites, as per suggestions here and from VerSoft, any suggestions?

This sounds like a resource issue. What is your processor, how many cores and how much RAM? Also use msconfig and shut down any start up items you do not need. Use the lowest resolution on Bonga or the auto resolution and see which one works better. Also, CB is a huge resource hog too at higher resolutions so I only use 320/240 even though I have an i7 quad core and 16 mb. For sound on CB, check to see you have it turned up to around 80. For Bonga make sure your microphone is selected.

AlyssaJane
03-19-2016, 11:31 PM
ok re-reading this thread and re-watching the tutorial. Having audio issues. Can't seem to get my audio to work on streamate and cams.com. It's like a one or the other no matter what I do.

Edit: I think I figured it out. Just had to have the cam mic selected instead of the splitter selected for audio.

Shanda1836
03-20-2016, 01:04 PM
OK, that's what I was thinking last night Hyori, after I wrote this, I was thinking what if my computer can't handle it...LOL, I didn't think in the high-tech term "resource problem" but I think you nailed it.

Do you have that resolution set at 320/240 in VerySoft and on CB?

My Processor is Intel Celron CPU N2840 @2.16 Ghz

Installed Memory (RAM) 3.89 GB usable

I have 2 cores. (Thank you for forcing me to find out what a core is.)

If more ram can help I think I can buy more ram, but I don't know about the rest of the stuff.

hyori
03-20-2016, 03:48 PM
OK, that's what I was thinking last night Hyori, after I wrote this, I was thinking what if my computer can't handle it...LOL, I didn't think in the high-tech term "resource problem" but I think you nailed it.

Do you have that resolution set at 320/240 in VerySoft and on CB?

My Processor is Intel Celron CPU N2840 @2.16 Ghz

Installed Memory (RAM) 3.89 GB usable

I have 2 cores. (Thank you for forcing me to find out what a core is.)

If more ram can help I think I can buy more ram, but I don't know about the rest of the stuff.

It will help if you can max out the ram or just save money towards getting a better machine. For now you can try lower resolutions in Verysoft if you really want to keep splitting sites otherwise stay on one site until you can upgrade. Next machine aim for latest generation i7. Let us know in the correct thread what machine you intend to buy and we will let you know if it is a good deal.

Shanda1836
03-22-2016, 12:00 AM
Thank you so much Hyori, When I bought this one, i5 was supposed to be good enough...ah well!!!

hyori
03-22-2016, 09:01 AM
I thought you said you had a Celeron.

AlyssaJane
03-22-2016, 09:09 AM
Running the encoder on the highest settings and it always starts out good but after about an hour my quality goes downhill fast. IDK if it's my internet (cuz I live in the sticks, moving soon.) or if there is a setting I need to adjust. When I don't splitcam the quality is pretty consistent but once I open that 2nd or 3rd side boom it starts dropping. The RTT is atrocious.

hyori
03-22-2016, 09:45 AM
^^ Yes, splitting takes a toll on RTT but if all your other stats are good it's worth the sacrifice. Try starting out on SM first, if it's slow then start adding the others.

AlyssaJane
03-22-2016, 12:36 PM
^^ Yes, splitting takes a toll on RTT but if all your other stats are good it's worth the sacrifice. Try starting out on SM first, if it's slow then start adding the others.

I do have my old shitty laptop and a backup cam, thinking I could just run inadvertently splitcam that way - at least until I move and give the new internet speeds a try. Supposedly they have quadruple the upload I get here. We shall see.

TheBrownFox
03-22-2016, 03:24 PM
I've had my Toshiba Satellite S55t-C laptop for a month, and I think it sucks that even with its good specs, I can't do this QuickRewards Radio Loyalty thing (earn a little money for keeping their radio playing and filling in the CAPCHA codes that pop up every 10 minutes) while broadcasting on ImLive...otherwise it'll make my ImLive video lag badly. :( So the only time I can do the QuickRewards Radio Loyalty thing is when I'm NOT camming. So I can't imagine what it'd be like trying to splitcam two sites (ImLive and Cams).