hi im a webcam model and ive been doing gold shows for a while till one day i got on and i went to start my gold show by pressing the start request button and it said disabled due to streaming satuts???? plz help now![]()

hi im a webcam model and ive been doing gold shows for a while till one day i got on and i went to start my gold show by pressing the start request button and it said disabled due to streaming satuts???? plz help now![]()
You have to message support

i already have NO HELP



Skipping the obvious, but I'm going to ask just to be sure, you were not disabled because of a violation?
Click to stream. In the top left corner of the page g into the settings. Is it set to "External Encoder" + "Party Chat"?
Also, this is from an old email, but I am pretty sure it's still the same requirements. From an email (model support) I got when I first started to do Gold Shows.
Are you using wifi when streaming? If so, please connect your internet
cable to your computer. You can try lowering your bit/frame rate to
600/12 from your encoder settings.
Also, make sure that you have the latest version of flash.
Make sure to check your CPU usage after your begin streaming. Your CPU
usage should NOT exceed 80% or your video quality will suffer.
If your CPU is over 80%, lower your bitrate value in the encoder until
you see the CPU below 80%.
To check your CPU usage on Microsoft Windows, hold the Ctrl + Alt +
Delete keys simultaneously, when the "task manager" appears, select the
performance tab.
To check your CPU usage on Mac OS, open the Activity Monitor. Your CPU
usage will be the total of User and System.



Did they write you back and it was not helpful, or just no response? Please keep in mind that the model support is very wishy washy; both with who you get to "help you", and also there are times when I've waited a day or two before I got a response, and other time I have received a reply within hours. :-/

yes im sure when i go to party chat the GOLD button is lit up!!! but the start request is not and thanks illl try it i only have 20 min before i start hope this works

they did respawn but it was genric... its said streammate was haveing problems but i went and checked to see if other models were haveing problems and they were not!!!!

ok im about to start streaming just to check my cpu wish me luck!!!

ok above cpu it said 100percent!!!!!! so now i just ajust the bit\frame?

hello every one!! still trying to get gold shows working i got my cpu down to 80 percent but it doesnt stay there it goes back and forth one sec it will be below 80 and then at 90 what do i do now??? gold shows are big for me i need to get it working!!!! thanks

hi still cant fiqure out what is going on with my gold shows not working!!! its driveing me crazy lol hopefully someone on here can help thanks
We know you need help but this is really an issue for support to handle. Try Vanessa or Liz





I wouldn't be doing it manually. They have exact settings they want us to use. Sounds like you may need to upgrade your computer. It takes a good quality computer and pretty fast internet upload speed to handle gold shows because of the traffic. I haven't had as many technical problems since I got an i7 with plenty of ram.
In the meantime untii you can upgrade if it were me I would go to the Support tab while logged in to Streamate and go to HD Encoder and download the lower quaiity settings for the encoder where it says "
Lower Quality The Lower Settings file is for users with older equipment and slower internet, or who are having problems using both of the above files."
I bet it will work a lot better for you with those settings.

ok thank you my ram says 34% is that good or bad?
Bookmarks